Fabric vertical blinds

Description

рис49.jpg

От управления	From control
К управлению	To control
От центра	From center
К центру	To center

Amigo vertical blinds are designed to be installed outside/inside openings as well as on Armstrong-type suspended ceilings.

loose-hanging models

aluminum head rail with integrated control mechanism

89 mm wide blades

control: cord/chain

blades are handled by means of a cord and turned by means of a control chain.

LIMIT DIMENSIONS

рис50.jpg

Model	Width, cm		Height, cm		Max. area, sq.m	Control length.
Model	Min.	Max.	Min.	Max.	Max. area, sq.m	Standard
Fabric	20	600	50	400	20	2/3 product height

Options

Valance. It is fabricated form a blade, inserted in a groover and closes a head rail from the face front.
Side plates. They close the rail ends.

Additionaly

2 IN 1

2 in 1 model is mainly designed to be installed in complex-shaped window openings or on window/door blocks. Its special feature is that the blades of different height are located on one head rail. The blades may have either straight (fig. 1) or slope graded edge (fig. 2). The number of combinations is unlimited. The blades may be moved to or from the control, to the side with greater blade height.

The limit dimensions and control variations are similar to those of the standard vertical blinds.

рис52.jpg

рис. 1	fig. 1
рис. 2	fig. 2
Вид спереди	Front view

WITH BEVELLED EDGE

The "Bevelled edge" model is designed mainly to be installed in window openings with sloping bottom part. The blades are located in the straight head rail and their lower edges form a sloping graded line. The blades may be moved to or from the control, to the side with greater blade height.

The limit dimensions and control variations are similar to those of the standard vertical blinds.

рис53.jpg

Вид спереди	Front view
Вид в сборе	Assembly view

SLOPE

The model has the straight head rail installed at an angle not exceeding 55° and blades of different height. The control may be located in any part of the head rail. The blades may be moved only towards the edge with greater height.

The blades position is fixed via a special wall-mount control cord retainer unit.

The limit dimensions and control variations are similar to those of the standard vertical blinds.

Положение ламелей фиксируется посредством специального настенного блока – фиксатора веревки управления.

Предельные размеры и варианты управления аналогичны стандартным вертикальным жалюзи.

рис54.jpg

Вид спереди	Front view
Вид в сборе	Assembly view
Блок-фиксатор веревки	Cord retainer unit

MEASUREMENT INFORMATION

рис55.jpg

Ширина 1	Width 1
Ширина 2	Width 2
Высота 1	Height 1
Высота 2	Height 2
Стандартные	Standard
Два в одном	2 in 1

Ширина 1	Width 1
Ширина 2	Width 2
Высота 1	Height 1
Высота 2	Height 2
Наклонные	Slope
Со скошенным краем	With bevelled edge

Measurement and installation

рис51.jpg

ВНУТРИ ОКОННОГО ПРОЕМА	INSIDE A WINDOW OPENING
Вид спереди	Front view
Вид сбоку	Side view
Кронштейны потолочные:	Ceiling brackets:
Кронштейн потолочный	Ceiling bracket
Кронштейн потолочный для «Armstrong»	Ceiling brackets for "Armstrong"
Рекомендации по замерам: Ширина изделия = ширина проема – 0,5 см Высота изделия = высота проема – 2 см	Measurement recommendations: Product width = opening width - 0.5 cm Product height = opening height - 2 cm

СНАРУЖИ ОКОННОГО ПРОЕМА	OUTSIDE A WINDOW OPENING
Вид спереди	Front view
Вид сбоку	Side view
Кронштейны стеновые:	Wall brackets:
Удлинитель стеновых кронштейнов	Wall bracket extension
Кронштейны стеновые 7,5 см, 10 см	Wall brackets 7.5 cm, 10 cm
Рекомендации по замерам+ 15 см 0,5 см Высота изделия = высота проема + 20 см	Measurement recommendations + 15 cm 0.5 cm Product height = opening height + 20 cm