Horizontal wooden and bamboo blinds 25 mm
|
Front view |
Вид спереди |
|
Side view |
Вид сбоку |
|
product height |
высота изделия |
Amigo horizontal wooden blinds 25 mm are recommended to be installed outside/inside an opening. These are loose-hanging rectangular or trapezoid models.
decorative wooden or bamboo valance closing the front head rail (33 mm height)
25 mm wide 2.5 mm thick wooden blades or 1.8 mm thick bamboo blades
wooden bottom rail
the wooden blades are pulled up and down by means of a pull cord and tilted by means of a wooden wand. The control may be either divided or combined.
|
DIVIDED CONTROL |
РАЗДЕЛЬНОЕ УПРАВЛЕНИЕ |
|
Cord on the left / Wand on the right |
Веревка слева/ Прут справа |
|
Cord on the right / Wand on the left |
Веревка справа/ Прут слева |
|
COMBINED CONTROL |
СОВМЕЩЕННОЕ УПРАВЛЕНИЕ |
|
Right |
Справа |
|
Left |
Слева |
Limit dimensions:
|
Material |
Width, cm |
Height, cm |
Max. area. sq.m |
Control length |
|||
|
Min. |
Max. |
Min. |
Max. |
Min. |
Max. |
||
|
wood |
33 |
210 |
40 |
300 |
3.6 |
30 |
wand - 150 cord - unlimited |
|
bamboo |
33 |
178 |
3.3 |
||||
Three dimension types of the tilting wand are used (within the product height range):
90 cm (control length < 105 cm)
120 cm (control length 105-135 cm)
150 cm (control length >136 cm)
Angle valance. Closes the head rail on both ends.
- Side fixation. Blind sheet fixation on both sides using steel wires routed through the special side openings in the blades.
- Does not prevent pulling the blades up/down.
- The bottom rail holder is designed to fix the bottom rail. In this case the product may only tilt.
- Divided control (if width exceeds 43.5 cm). The cord and wand are located on opposite sides.
SPECIAL SHAPES
TRAPEZOIDS AND HALF-TRAPEZOIDS
Trapezoid-shaped blinds are the functional solutions for openings with a small bevelled edge.
|
Half-trapezoid |
Полутрапеция |
|
Trapezoid |
Трапеция |
The bevel size is limited with the following dimensions depending of the blinds width:
Bevel limit, D
|
Model |
Bamboo |
Wood |
|
Trapezoid |
20 cm |
40 cm |
Control:
cord/wand are located at the side opposite to the bevel for half-trapezoid and arbitrary for trapezoid.
Measurements and installation:
Similar to standard model 16/25 mm. Height, width at the bottom and width at the top are measured.
Additional option:
Side fixation for half-trapezoid is possible from the side opposite to the bevel. Side fixation for trapezoid is not provided.
ROUND
Round-shaped horizontal blinds are available with 25 mm aluminum blades only.
Control:
cord/wand are always located separately. The sheet is lifted to the maximum width point.
Measurements and standard installation:
Round minimum diameter 400 mm. Round maximum diameter 1000 mm. A round opening diameter is measured. 1 cm shall be deducted form the opening diameter to get the product diameter.
2 IN 1
If two products are located next to each other, they may be installed on one head rail with individual control for each of them.
Measurements and standard installation:
similar to standard models 25 mm. Distance between sheets - 1 cm.
|
OUTSIDE A WINDOW OPENING |
СНАРУЖИ ОКОННОГО ПРОЕМА |
|
Measurement recommendations: Product width = opening width + 10 cm Product height = opening height + pack height* |
Рекомендации по замерам: Ширина изделия=ширина проема + 10 см Высота изделия=высота проема + высота пакета* |
|
Set of standard brackets |
Комплект стандартных кронштейнов |
|
INSIDE A WINDOW OPENING |
ВНУТРИ ОКОННОГО ПРОЕМА |
|
Measurement recommendations: Product width = opening width - 1 cm Product height = opening height - 2 cm |
Рекомендации по замерам: Ширина изделия=ширина проема - 1 см Высота изделия=высота проема – 2 см |
|
Set of standard brackets |
Комплект стандартных кронштейнов |
|
ON WINDOW FRAME WITH SIDE FIXATION OPTIONS (with drilling) |
НА ОКОННУЮ РАМУ С ОПЦИЕЙ БОКОВАЯ ФИКСАЦИЯ (со сверлением) |
|
Measurement recommendations: Product width = width as per fillet dimension Product height = frame height |
Рекомендации оп замерам: Ширина изделия = ширина по габариту штапика Высота изделия = высота рамы |
|
Universal bracket 240180-0000 |
Универсальный кронштейн 240180-0000 |
|
B-type lower plastic bracket 249181-0000 |
Кронштейн нижний тип В пластмассовый 249181-0000 |
CALCULATION OF PACK HEIGHT (OF FOLDED PRODUCT)
|
Blind height, cm |
Pack height, cm |
|
|
wood |
bamboo |
|
|
50 |
12.4 |
10.2 |
|
100 |
19.1 |
14.6 |
|
150 |
25.8 |
18.9 |
|
200 |
32.5 |
23.3 |
|
250 |
39.1 |
27.7 |
|
300 |
45.8 |
32.0 |
Strip, piano wood, 2", 122/152/183/213 cm
Strip, forte wood, 2", 122/152/183/213 cm
Strip, snow wood, 2", 122/152/183/213 cm
Strip, rose wood, 2", 122/152/183/213 cm
Strip, red wood, 2", 122/152/183/213 cm
PVC strip, birch, 2"
PVC strip white 2"
PVS strip, beech, 2"
PVC strip, cherry 2"
PVC strip, walnut 2"
Strip, wenge wood, 1", 90/120/150 cm
Strip, snow wood, 1", 90/120/150 cm